Rode NT6 Small-Diapraghm Condenser Microphone

Designed for difficult mounting applications or discreet placement.

£178.25 (ex vat)

code 29698

3-12 working days


for expert advice, price beating, package deals or even just a chat - contact a DV Store

Print this page

Send to a friend

Related Products and Accessories

select additional items to add to your order ...

  • DCS Pro 5m XLR - XLR Balanced Microphone Cable
  • DCS Pro 5m XLR - XLR Balanced Microphone Cable
  • High quality, 5 metre balanced audio cable with high grade balanced male XLR and female XLR connectors.
  • £11.00
  • in stock
  • DCS Pro 10m XLR - XLR Balanced Microphone Cable
  • DCS Pro 10m XLR - XLR Balanced Microphone Cable
  • High quality, 10 metre balanced audio cable with high grade balanced male XLR and female XLR connectors.
  • £14.00
  • in stock
  • M-Audio Audio Buddy Dual Mic Preamp and Direct Box with Phantom Power
  • M-Audio Audio Buddy Dual Mic Preamp and Direct Box with Phantom Power
  • The perfect companion piece for any digital audio system. Its the ideal audio gateway for recording the two most significant, non-line level instruments: microphones and electric guitars.
  • £48.50
  • in stock
  • Behringer MIC2200 Ultragain Pro 2 Channel Tube Mic Preamp / Line Driver / DI Box
  • Behringer MIC2200 Ultragain Pro 2 Channel Tube Mic Preamp / Line Driver / DI Box
  • The ideal extension to your console, MIDI setup or hard disk recording system.
  • £57.86
  • Usually shipped in 3-12 working days
Rode NT6 Small-Diapraghm Condenser Microphone

NT6 Small-Diapraghm Condenser Microphone

Sounds 

Seen the Rode NT6 Small-Diapraghm Condenser Microphone at a lower price?

We WILL compete on price! E-mail sales@mveducation.com

Rode NT6 Small-Diapraghm Condenser Microphone description:

The new Rode NT6 is a small-diaphragm condenser microphone that's specifically designed for difficult mounting applications or discreet placement. The compact capsule of the NT6 is connected to the main part of the mic by a 3-meter Kevlar-reinforced cable. The NT6 runs on standard 48-volt phantom power. The mic has a fixed cardioid pattern, a frequency range of 40Hz-20kHz and a maximum SPL figure of 135dB.

The NT6 is extremely well suited to any situation where a small unobtrusive but powerful microphone system is required. It features a unique compact capsule connected to the main body of the mic by a three-meter cable, making it perfect for discrete instrument miking, especially in tight spaces. The NT6's mic body, which houses the preamp and XLR connector, also features -10dB pad and 80Hz high-pass filter switches, so you can adjust these settings without disturbing the position of the capsule. The NT6 is supplied with all the necessary mounting hardware, a windshield and a zip-up pouch.

Features:

  • 1/2 (externally biased) gold spluttered true condenser capsule
  • Heavy duty satin-nickel-plated body
  • 2-position variable pad: 0 dB and -10 dB
  • 2-position variable high-pass filter: flat and 80 Hz
  • Surface mount technology
  • Low noise
  • Wide dynamic range
  • Full frequency response
  • Supplied complete with 2-axis swivel mount, M5 clip, WS5 (Black) Wind Shield and Soft Pouch
  • Designed & manufactured in Australia

    • Specifications:

  • Acoustic Principle: Externally polarised 1/2 (13mm) pressure gradient condenser
  • Directional Pattern: Cardioid
  • Frequency range: 40 Hz ~ 20,000 Hz selectable HPF @ 80 Hz/12 dB/octave
  • Output Impedance: 200 O
  • Signal/Noise ratio DIN/IEC 651: 75 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
  • Equivalent Noise: 19 dB SPL (per IEC651, IEC268-15)
  • Maximum SPL: 138 dB (@ 1% THD into 1 kO) 148 dB (@ 1% THD into 1 kO) - pad at maximum
  • Sensitivity at 1 kHz into 1 kO: -38 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB
  • Maximum output voltage: 6 dBu (@ 1% THD into 1 kO)
  • Dynamic Range - DIN/IEC 651: 119 dB (per IEC651, IEC268-15)
  • Power (Supply voltage): 48 Volts (P48)
  • Output Connection: 3 pin XLR, balanced output between pin 2(+), pin (-) & pin 1 (ground)
  • Weight: 386 grm. (12.41 oz.)
  • Dimensions: Diameter = 20 mm Length = 118.4 mm
  • Main Body Asssembly: Diameter = 20 mm
  • Length = 88.5 mm (Capsule face to cable connector) Height = 64 mm (Capsule to mount)

    • Rode NT6 Small-Diapraghm Condenser Microphone (code 29698)
    Designed for difficult mounting applications or discreet placement.
    £178.25 (ex vat)

About MV
Pro Audio Stores

For telephone mail order, expert advice, price- beating, package deals and a more personal service at no extra cost please contact or visit your nearest DV store!