Tapco DB-1P Passive DI Box

Lets you send your instrument signal through long cables or audio snakes without picking up interference and without high-frequency loss.

£24.67 (ex vat)

code 37509

3-12 working days

Engineered by Mackie!


for expert advice, price beating, package deals or even just a chat - contact a DV Store

Print this page

Send to a friend

Related Products and Accessories

select additional items to add to your order ...

  • Tapco Squeez SQ-2 Compressor / Gate
  • Tapco Squeez SQ-2 Compressor / Gate
  • Two channels of smooth compression and gating, plus an adjustable "Air" EQ for that classic vocal sound of the '60s and '70s.
  • £68.08
  • Usually shipped in 3-12 working days
  • Tapco Tweeq T231 Graphic Equaliser
  • Tapco Tweeq T231 Graphic Equaliser
  • 2-channel 31-band graphic equalizer that allows you to "tune" your live sound setup to sound best in any given space.
  • £85.10
  • Usually shipped in 3-12 working days
Tapco DB-1P Passive DI Box

DB-1P Passive DI Box

Sounds 

Seen the Tapco DB-1P Passive DI Box at a lower price?

We WILL compete on price! E-mail sales@mveducation.com

Tapco DB-1P Passive DI Box description:

The Tapco DB-1P converts unbalanced line-level signals to balanced mic-level output and provide signal and impedance matching for the direct connection of instruments like guitars, basses and keyboards to amplifiers and mixers.

The Tapco DB-1P lets you send your instrument signal through long cables or audio snakes without picking up interference and without high-frequency loss. A 1/4" Input jack is provided for connecting instrument or speaker-level signals, and a separate 1/4" Thru jack allows the unbalanced signal to be sent to an onstage amplifier while the balanced signal is sent to a mixer. A ground Lift switch helps eliminate hum and buzz problems in musical instrument hookups.

Not every instrument is made to connect directly to a mixer. Guitars and basses have a lower output signal level, and their output is not balanced. If you plug them straight into a mixer, you have to jack the preamp level to the max just to get a quiet, wimpy sound. Most keyboards have unbalanced outputs, which means if you try to use long cables, they can pick up all sorts of noise. The Tapco DB-1P solves these and other sticky studio and live difficulties. The DB-1P features a filter for enhancing bass and guitar sounds

The Tapco DB-1P passive direct box features:

  • High-performance Direct Injection box
  • 1/4" input and thru connections with ground lift
  • Rugged metal chassis with rubber sides for extra durability
  • Convenient stackable design
  • INPUT - Connect the signal source to this 1/4" unbalanced TS jack.
  • INST/AMP – Lets you optimize for instrument signals or amplifier outputs.
  • FLAT/FILTER – Useful for eliminating hiss when connected to an amplifier output.
  • THRU - This 1/4" input lets you connect an instrument to an amplifier onstage.
  • OUTPUT - This balanced XLR jack provides a low-impedance mic-level signal for connecting to a microphone input on a mixer.
  • GND/LIFT - Helps to eliminate buzz and hum due to ground loops in the sound system.

Tapco DB-1P Passive DI Box (code 37509)
Lets you send your instrument signal through long cables or audio snakes without picking up interference and without high-frequency loss.
£24.67 (ex vat)

About MV
Pro Audio Stores

For telephone mail order, expert advice, price- beating, package deals and a more personal service at no extra cost please contact or visit your nearest DV store!