Search our site

Basket (0) £0.00

  • 01708 771950
Twitter Facebook Email Facebook

Audio Technica AT2022 X/Y Stereo Condenser Microphone

Code: 86366    Manufacturer Part No: AT2022   
Audio Technica AT2022 X/Y Stereo Condenser Microphone

£165.83

Price excludes VAT

€191.70 (euros)

available at short notice

  • Print this page
DV247 Expert

Got a question? Our experts are here to help

Need advice on Condenser? Contact us on 01708 771950, by e-mail, or find an expert.

AT2022 X/Y Stereo Condenser Microphone description:

The Audio Technica AT2022 X/Y Stereo Condenser Microphone with unidirectional condenser capsules. The AT2022 is portable, affordable and can be used to capture live sound and field recordings.

The AT2022 from Audio Technica has can pickup audio from 90 degrees (Narrow) and 120 degrees (Wide). The condenser capsules have been selected due to their high frequency pickup and clear sound representation. The AT2022 features a low-frequency roll-off for any unwanted low-frequency noise.

The AT 2022 microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and .5 m cable that terminates in a 3.5 mm stereo plug.

The main features of the AT2022 includes:

  • Elements: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: X/Y Stereo
  • Frequency Response: 20–20,000 Hz
  • Low Frequency Roll-Off: 150 Hz, 6 dB/octave
  • Open Circuit Sensitivity: -41 dB (8.9 mV) re 1V at 1 Pa
  • Channel Balance: <2.5 dB
  • Impedance: 200 ohms
  • Maximum Input Sound Level: 122 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range (Typical): 103 dB, 1 kHz at Max SPL
  • Signal-To-Noise Ratio: 75 dB, 1 kHz at 1 Pa
  • Battery Type: 1.5V AA/UM3
  • Battery Current / Life: 1.2 mA / 500 hours typical (alkaline)
  • Switch: Off, on/flat, on/roll-off
  • Weight: 270 g (9.5 oz)
  • Dimensions: 192.0 mm (7.56") long, 65.0 mm (2.56") maximum head diameter, 21.0 mm (0.83") body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Cable: 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end
  • Accessories Included: AT8405a stand clamp for 5/8"-27 threaded stands, fuzzy windscreen, AA battery, soft protective pouch
  • WARNING: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result.

MPN: AT2022

Manufacturer: Audio Technica

This page first created on: 09/05/2011

Customer Reviews

There are no product reviews for this product.