Search our site

Basket (0) £0.00

  • 01708 771950
Twitter Facebook Email Facebook

Audix ADX-20i Pre-Polarized Condenser Microphone

Code: 32539    Manufacturer Part No: AX-ADX20I   
Audix ADX-20i Pre-Polarized Condenser Microphone


Price excludes VAT

€141.99 (euros)

available at short notice

  • Print this page
DV247 Expert

Got a question? Our experts are here to help

Need advice on Microphones? Contact us on 01708 771950, by e-mail, or find an expert.

ADX-20i Pre-Polarized Condenser Microphone description:

The Audix ADX-20i is a pre-polarized condenser microphone designed to handle a wide variety of clip-on applications.

The Audix ADX20i is sonically superior as well as aesthetically pleasing and is ideally suited for saxophone, trombone, trumpet and other brass instruments.

With a smooth uniform response over a frequency range of 40 Hz – 20 kHz, the ADX-20i provides a rich, warm sound not typical of microphones this size. It is machined from solid brass and has a low reflective black e-coat finish. The ADX-20i operates on phantom power (9-52 volts) with the optional preamp module APS-910. It may be used in battery mode with optional phantom power adapter (APS-911 not included). The ADX-20i can be utilised with a wireless system. Depending on the brand of wireless and the connector configuration of the instrument body pack, the ADX-20i connector would need to be modified accordingly.

Low noise electronic circuitry, and balanced low impedance output allow for interference free performance even with long cable runs.

Audix ADX20i Features

  • High tension spring clamp keeps mic in place
  • Multi-position gooseneck
  • Highly accurate sound reproduction
  • For micing Saxophone, trumpet, trombone
  • Clips on to hardware, stands, cabinets for “hard to mic” areas or instruments
  • Also functions as a room ambience microphone for recording or broadcast

Audix ADX20i Specifications

  • Transducer Type: Condenser (pre-polarized)
  • Frequency Response: 40 Hz - 20 kHz
  • Polar Pattern: Cardioid
  • Output Impedance: 250 Ohms balanced
  • Open Circuit Sensitivity: 5.2 mV
  • Equivalent Noise Level: 29 dB (A weighted)
  • Signal to Noise Ratio: 65 dB (ref 1k @ 1 Pascal)
  • Power Requirements: 9 - 52v phantom
  • Maximum SPL: 130 dB
  • Cable/Connector: Shielded 6ft cable terminating to a miniature 3 pin XLR-f
  • Phantom Adapter: mini XLR male - XLR male
  • Polarity: Positive voltage on pin, 2 relative to pin 3 of output XLR connector
  • Housing: Machined Brass
  • Gooseneck: Flexible steel
  • Weight: 1.7 oz/4.7 grams (without cable)


Manufacturer: Audix

This page first created on: 27/06/2007

Customer Reviews

There are no product reviews for this product.