Search our site

Basket (0) £0.00

  • 01708 771950
Twitter Facebook Email Facebook

Audix ADX-60 Pre-Polarized Condenser Boundary Microphone

Code: 16437   
Audix ADX-60 Pre-Polarized Condenser Boundary Microphone

£156.67

Price excludes VAT

€182.68 (euros)

available at short notice

  • Print this page
DV247 Expert

Got a question? Our experts are here to help

Need advice on Microphones? Contact us on 01708 771950, by e-mail, or find an expert.

ADX-60 Pre-Polarized Condenser Boundary Microphone description:

The ADX-60 is a pre-polarized condenser microphone designed to handle a wide variety of recording and live sound applications as well as permanent installations. Ideal for podium, room ambience, theatre, plays, choirs, video, teleconferencing and musical applications such as piano and kick drum. The ADX-60 is equipped with a cardioid element. With a smooth uniform response over a frequency range of 50Hz - 18 kHz, the ADX- 60 provides a warm, full bodied sound not typical of microphones this size. The ADX-60 is housed in a heavy-duty zinc die-cast base with a low reflective black e-coat finish. Operating on phantom power (9-52 volts), the ADX-60 is supplied with an in-line preamplifier (APS- 910) and 25 feet of detachable shielded microphone cable. Low noise electronic circuitry and balanced output allow interference-free performance even with long cable runs.

Features:

  • Great mic for Meetings, presentations, conferences, as a Low profile podium mic, for Video / teleconferencing, Theatre / school plays, Kick drum, piano, Sporting events
  • High SPL Capability at 130dB
  • Wide Frequency range 20Hz - 18Khz
  • Ideal for permanent installation

Specifications:

  • Transducer Type Condenser (pre-polarized)
  • Frequency Response: 50 Hz - 18 kHz
  • Polar Pattern ADX60-c: (cardioid)
  • Output Impedance: 250 Ohms balanced
  • Open Circuit Sensitivity:Cardioid 5.5 mV
  • Equivalent Noise Level: 29 dB (A weighted)
  • Signal to Noise Ratio: 65 dB (ref 1k @ 1 Pascal)
  • Power Requirements: 9 - 52v phantom
  • Maximum SPL: 130 dB
  • Cable/Connector: Mini Swithcraft to 3 pin male XLR connector output on APS-910 preamplifier
  • Polarity: Positive voltage on pin 2 relative to pin 3 of output XLR connector
  • Housing: Die Cast Zinc case with Machined Brass capsule
  • Weight: 5 oz/143 grams

Manufacturer: Audix

This page first created on: 27/06/2007

Customer Reviews

There are no product reviews for this product.