Search our site

Basket (0) £0.00

  • 01708 771950
Twitter Facebook Email Facebook

Samson AirLine Guitar AG1 Wireless System, CH3

Channel 3 (864.50 MHz): Includes AP1 Pedal Receiver and AG1 Transmitter for Gibson-style Guitars

Code: 42283    Manufacturer Part No: SWQSGG-E3   
Samson AirLine Guitar AG1 Wireless System, CH3

£200.00

Price excludes VAT

€231.40 (euros)

available at short notice

  • Print this page
DV247 Expert

Got a question? Our experts are here to help

Need advice on Wireless? Contact us on 01708 771950, by e-mail, or find an expert.

AirLine Guitar AG1 Wireless System, CH3 description:

The revolutionary Samson AirLine AG1/AP1 system consists of an AG1 "plug-in" guitar transmitter for traditional Gibson-style inputs, and an AP1 pedal receiver.

Less than half the size of conventional body packs, the miniaturized Samson Airline AG1 transmitter runs on a tiny triple-A battery with 14-hour battery life. Featuring an array of on-board controls: A Power On/Off and Mute switch, red/green LED for Power On/Off, a Peak LED and an Input Level control for different pickups. And UHF (Ultra High Frequency) means clearer frequencies with less interference.

Designed for use with your compact effect pedals, the AP1 pedal receiver gives you reception you can always depend on. It features a 1/4" output jack, Power switch, Peak LED and a Volume control. You can use a 9 volt battery or an AC adapter to power the receiver. When you unplug your the unit, the battery is disabled to conserve power.

Samson AirLine AG1/AP1 main features include:

  • UHF Frequency operation means less interference
  • Gibson-style straight Jack plug
  • RF Output Power (5mW): -4dB Minimum, +3dB Maximum
  • Frequency Stability: -40kHz Minimum, 40kHz Maximum
  • Modulation Factor: 13kHz Minimum, 15kHz Typical, 17kHz Maximum, Input 1kHz-10dBv
  • Maximum Input Level: +2 dBv
  • Input Impedance: 2K ohms
  • THD: < 2% (1 kHz deviation 15kHz)
  • Audio Frequency Response: 50Hz - 15kHz (?3.5 dB)
  • Operating Power Voltage: 1.5V Typical, 1.05V Minimum, 2V Maximum
  • Current Consumption: 60mA Typical
  • AG1 Output: 6.3mm, 1/4 in. mono Jack
  • AG1 Antenna: Permanently attached 1/4 wave length wire
  • AG1 Controls: Power Switch, 15 dB Pad Switch
  • AG1 Indicators: Power On (LED Flash), Low Battery (LED On when battery less than 1.1V)

MPN: SWQSGG-E3

Manufacturer: Samson

This page first created on: 27/06/2007

Customer Reviews

There are no product reviews for this product.