The Adam A7X (Pair) & Stands consists of two Adam A7X Active Studio Monitors and two Fame DB039 Monitor Stands.
The Adam A7X Active Studio Monitor (Pair) consists of two Adam A7X Active Studio Monitors. The distinguishing feature between the A7X and the A7 is the X-ART tweeter, which extends the frequency response of these monitors up to 50kHz with a higher efficiency and higher maximum sound pressure levels.
The 7” mid-woofer has been redesigned with a bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, whilst the mid-woofer is driven by a 100W PWM amp.
The front panel of the A7X includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. On the rear panel of the A7X are several additional controls including a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
The main features of the Adam A7X Active Studio Monitor (Pair) include:
- Mid-Woofer: 7'' Carbon/Rohacell/Glass Fibre (1.5" Voice Coil)
- Tweeter: 4" X-ART
- Mid-Woofer Amplifier: PWM
- Mid-Woofer Power RMS / Music: 100W / 150W
- Tweeter Amplifier: Class A/B
- Tweeter Power RMS / Music: 50W / 75W
- Frequency Response: 42Hz - 50kHz
- Maximum SPL @ 1m: >114dB (Per Pair)
- Crossover Frequency: 2500Hz
- High Shelf EQ > 5 kHz: ±6 dB
- Low Shelf EQ: ±6 dB
- Tweeter Gain: ±4 dB
- Input Connectors: XLR, RCA
- Input Impedance: 30 kOhm
- Dimensions: 337 x 201 x 280mm
The Fame DB 039 Monitor Stand is a studio monitor stand with an adjustable height of 930–1370mm. Made of steel and anodised black, the DB 039 is suitable for monitors weighing up to 23 kg. The support plate’s dimensions are 230 x 230mm and the tripod’s diameter is 450mm.
The main features of the Fame DB 039 Monitor Stand include:
- Material: Steel
- Adjustable Height: 930–1370 mm
- Max. Load Capacity: 23 kg
- Support Plate Dimensions: 230 x 230 mm
- Tripod Diameter: 450 mm
- Colour: Anodised Black